![]() |
|
||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
| Features: |
|
||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
| Description: A trapezoidal monitor vented full range speaker system with built in handles to help move and position. The TM1510 has one 1 - 15", 1 - 10" and a + 2" neodymium high frequency driver. The TM1510 has the very same low profile height as the TM1501, TM1810, TM1502. The TM1501N is great for low profile monitor applications. |
|||||||||||||||||||||||||||||||||||
| Application: | |||||||||||||||||||||||||||||||||||
|
The TM1510 full range speaker is excellent for monitors, side fills, concert clustered mains, close ceiling installations for churches and nightclubs. It is very versatile for touring or installations of any type. The unique trapezoidal shape makes it great for clustering in small areas for larger sound coverage patterns. The TM1510 comes with flying adapters built in. The TM1510 can only be used in both passive or bi-amp applications. |
|||||||||||||||||||||||||||||||||||
| Applications Include: | |||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
| Architect & Engineer Specifications: | |||||||||||||||||||||||||||||||||||
|
The loudspeaker will be a bi-amp trapezoidal monitor speaker cabinet that is line source arrayable or concert clusterable. Complete with flying hardware adapters built in. The loudspeaker will be tuned for use from 40Hz to 20KHz + / - 3db. This cabinet will be covered with Linex for the most severe physical handling. The cabinet will be 22"w x 33.75"h x 17.5"d vertically, and less than 20"h x 33.75"w x 22"d horizontally for use in monitor position. The loudspeaker weight will be 115 pounds. The front grille will be 16 gauge steel (with 55% air flow) powder coated on both sides with a rubber surround for human protection and sound resonance dampening. The loudspeaker will be one 15" with a wattage of 850 watts RMS with a peak power of 4,000 watts performance at 8 ohms. The sensitivity will be 99db SPL at 1 watt 1 meter. The midrange horn section is passive with mid and high frequency separation. ?The total power for this section is 400 watts RMS with a peak power of 1,200 watts. The sensitivity will be 99db mid and 109 high 1 watt 1 meter. The rigging adapters are installed in the cabinet at 6" and 10" from the front of the cabinet and 2" from the corner side of the cabinet. The loudspeaker will have handles located at each end of the cabinet between the grille and the baffle board. The cabinet will be reinforced with internal bracing. |
|||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
| Performance: | |||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
| Physical: | |||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
| Frequency Graph: | |||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
Back to the Solid NRG Homepage |
|||||||||||||||||||||||||||||||||||
| Speakers: TM1001 / TM1002 / TM1201 / TM1202 / TM1501 / TM1501N / TM1502 / TM1502N / TM1510 / TM1810 | |||||||||||||||||||||||||||||||||||
| Sub Woofers:SS1801SQ / SS1801T / DS1802SQ / DS1802T | |||||||||||||||||||||||||||||||||||
| Specifications are subject to change without notice. |
©2003 MLSC. Inc. All rights reserved. |
||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
|
Solid
NRG in association with Meteor
Light and Sound Co. |
|||||||||||||||||||||||||||||||||||