The TM1502N full range speaker is excellent for monitors, side fills, concert clustered mains, close ceiling installations for churches and nightclubs. It is very versatile for touring or installations of any type. The trapezoidal shape makes it great for clustering in small areas for larger sound coverage patterns. The TM1502N comes with flying adapters built in.

The loudspeaker will be a bi-amp trapezoidal monitor speaker cabinet that is line source arrayable or concert clusterable. Complete with flying hardware adapters built in. The loudspeaker will be tuned for use from 40Hz to 20KHz + / - 3db. This cabinet will be covered with Linex for the most severe physical handling. The cabinet will be 22"w x 48"h x 17.5"d vertically, and less than 20"h x 48"w x 22"d horizontally for use in monitor position. The loudspeaker weight will be 102 pounds. The front grille will be 16 gauge steel (with 55% air flow) powder coated on both sides with a rubber surround for human protection and sound resonance dampening. The loudspeaker will be two - 15" with a wattage of 1,100 watts RMS with a peak power of 3,200 watts performance at 4 ohms. The sensitivity will be 101.5db SPL at 1 watt 1 meter. The horn driver will be a 2" Neodymium driver with a wattage rating of 200 watts RMS and a peak power of 600 watts with the lowest crossover point being 1.2KHz with a SPL at 1 watt 1 meter of 111db. The rigging adapters are installed in the cabinet at 6" and 10" from the front of the cabinet and 2" from the corner side of the cabinet. The loudspeaker will have handles located at each end of the cabinet between the grille and the baffle board. The cabinet will be reinforced with internal bracing.

Back to the Solid NRG Homepage

©2003 MLSC. Inc. All rights reserved.

Solid NRG in association with Meteor Light and Sound Co.
Tel: (256) 461-8000     Fax: (256) 461-7708
Website: www.meteor-global.com    Feedback Form    e-mail: sales@solid-nrg.com