Features:


	Waterproof Cones
	Smoother frequency response
	22" Wide and invertible for truck packs
	48" tall in a cluster or 48" wide in a line source array.
	Less than 20" tall in monitor application either position
	Built in handles for easy positioning
	Multiple uses and applications from one Cabinet
	Great Sound You Can Feel

Description:
A trapezoidal monitor vented full range speaker system with built in lifting handles. The TM1502 has two 2 -15" + 2" neodymium high frequency driver. The TM1502 has the same low profile height as the TM1201, TM1501, TM1801. The TM1502 is great for low profile monitor applications.

Application:

The TM1502 full range speaker is excellent for monitors, side fills, concert clustered mains, close ceiling installations for churches and nightclubs. It is very versatile for touring or installations of any type. The trapezoidal shape makes it great for clustering in small areas for larger sound coverage patterns. The TM1502 comes with flying adapters built in.

Applications Include:


Festival Sound Reinforcement	Rave Parties	Large Mobile DJ Systems
Concert tours	Outdoor Events	Theaters
Dance Clubs	Concert Venues	Production Events
Low profile Church installations	Trade Shows	Corporate Event Presentations

Architect & Engineer Specifications:

The loudspeaker will be a bi-amp trapezoidal monitor speaker cabinet that is line source arrayable or concert clusterable. Complete with flying hardware adapters built in. The loudspeaker will be tuned for use from 40Hz to 20KHz + / - 3db. This cabinet will be covered with Linex for the most severe physical handling. The cabinet will be 22"w x 48"h x 17.5"d vertically, and less than 20"h x 48"w x 22"d horizontally for use in monitor position. The loudspeaker weight will be 140 pounds. The front grille will be 16 gauge steel (with 55% air flow) powder coated on both sides with a rubber surround for human protection and sound resonance dampening. The loudspeaker will be two - 15" with a wattage of 1,700 watts RMS with a peak power of 8,000 watts performance at 4 ohms. The sensitivity will be 101.5db SPL at 1 watt 1 meter. The horn driver will be a 2" Neodymium driver with a wattage rating of 200 watts RMS and a peak power of 600 watts with the lowest crossover point being 1.2KHz with a SPL at 1 watt 1 meter of 111db. The rigging adapters are installed in the cabinet at 6" and 10" from the front of the cabinet and 2" from the corner side of the cabinet. The loudspeaker will have handles located at each end of the cabinet between the grille and the baffle board. The cabinet will be reinforced with internal bracing.

Performance:


Frequency Response:	+/- 3db 40Hz to 20KHz
Recommended High-Pass Frequency:	30-40Hz
Sensitivity 1 watt / 1 meter:	101.5db LF / 111db HF
Cabinet Impedance:	4 ohm LF + 8 ohm HF
Power Rating RMS:	1,700 watts LF / 200 watts HF
Power Rating Continuous:	4,000 watts LF / 400 watts HF
Power Rating Peak:	8,000 watts LF / 600 watts HF
Recommended Cross-Over Point:	1.2 KHz @ 48 db

Physical:


Speaker Operation:	Full Range Bi-amp Only
Coverage HF:	55 x 90 Horizontally 90 x 55 Vertically rotatable
Type:	2 - 15" + 2" Neodymium vented Trapezoidal Monitor
Material:	Highest Quality Birch Plywood
Finish:	Covered in Truck Bed Liner (Linex) Available in Black or Custom Colors
Connectors:	4 Nuetrik 4-Pin Connectors per box
Grille:	Powder coated Perforated Steel
Optional High Pack Cabinets:	TM1201, TM1202, TM1501, TM1501N, TM1510, TM1810
Optional Sub Woofers:	SS1801T, SS1801SQ, DS1801T, DS1801SQ
Trapezoidal Monitor Configuration:	Clusterable, Line Source Arrayable
16 Point Rigging Adapters:	Built into each Cabinet
Height:	48 inches
Width:	22 inches
Depth:	14.25 inches
Weight:	140 lbs

Frequency Graph:

Measured @ 12ft - Full Power Cross-Over 1.25Kz @ 48db. No Eq. Low shelf @ 48db.

Back to the Solid NRG Homepage

Speakers: TM1001 / TM1002 / TM1201 / TM1202 / TM1501 / TM1501N / TM1502 / TM1502N / TM1510 / TM1810

Sub Woofers: DS1801SQ / DS1801T/ SS1801SQ / SS1801T / DS1802SQ / DS1802T

Specifications are subject to change without notice.

Solid NRG in association with Meteor Light and Sound Co.
Tel: (256) 461-8000 Fax: (256) 461-7708
Website: www.meteor-global.com Feedback Form e-mail: sales@solid-nrg.com