Features:


	Waterproof Cones
	Smoother frequency response
	16" Wide and invertible for truck packs
	26" tall when standing in Horizontal position
	15" tall in monitor application either position
	Built in handles
	Multiple uses from one Cabinet
	Great Sound You Can Feel

Description:
A trapezoidal monitor vented full range speaker system with built in handles and fly-ware adapters. The TM1201 has one (1) -12" + 2" neodymium high frequency driver. The TM1201 has the same low profile height as the TM1202. Great for low profile monitor applications.

Application:

The TM1201 full range speaker is excellent for monitors, side fills, concert clustered mains, close ceiling installations for churches and nightclubs. It is very versatile for touring or installations of any type. The unique trapezoidal shape makes it great for clustering in small areas providing larger coverage patterns. The TM1201 comes with flying adapters built in. Used in bi-amp applications only.

Applications Include:


Festival Sound Reinforcement	Rave Parties	Large Mobile DJ Systems
Concert tours	Outdoor Events	Theaters
Dance Clubs	Concert Venues	Production Events
Low profile Church installations	Trade Shows	Corporate Event Presentations

Architect & Engineer Specifications:

The loudspeaker will be a bi-amp trapezoidal monitor speaker cabinet that is line source arrayable or concert clusterable. Complete with flying hardware adapters built in. The loudspeaker will be tuned for use from 60Hz to 20KHz + / - 3db. This cabinet will be covered with Linex for the most severe physical handling. When placed vertically, the cabinet will be 16"w x 26"h x 14.75"d and less than 15"h x 26"w x 14.75"d when placed horizontally for use in monitor position. The loudspeaker weight will be 58 pounds. The front grille will be 16 gauge steel (with 55% air flow) powder coated on both sides with a rubber surround for human protection and sound resonance dampening. The loudspeaker will be one 12" with a power handling capacity of 450 watts RMS with a peak power of 1,200 watts at 8 ohms. The sensitivity will be 100db SPL at 1 watt 1 meter. The horn driver will be a 2" Neodymium driver with a wattage rating of 200 watts RMS and a peak power of 600 watts with the lowest crossover point being 1.2KHz with a SPL at 1 watt 1 meter of 111db. The rigging adapters are installed in the cabinet at 6" and 10" from the front of the cabinet and 2" from the corner side of the cabinet. The loudspeaker will have handles located at each end of the cabinet between the grille and the baffle board. The cabinet will be reinforced with internal bracing for added durability.

Performance:


Frequency Response:	+/- 3db 60Hz to 20KHz
Recommended High-Pass Frequency:	40-50Hz
Sensitivity 1 watt / 1 meter:	100db LF / 111db HF
Cabinet Impedance:	8 ohm LF + 8 ohm HF
Power Rating RMS:	450 watts LF / 200 watts HF
Power Rating Continuous:	900 watts LF / 400 watts HF
Power Rating Peak:	1,200 watts LF / 600 watts HF
Recommended Cross-Over Point:	1.2 KHz @ 48 db

Physical:


Speaker Operation:	Full Range Bi-amp Only
Coverage HF:	55 x 90 Horizontally 90 x 55 Vertically
Type:	1-12" + 2" Neodymium vented Trapezoidal Monitor
Material:	Highest Quality Birch Plywood
Finish:	Covered in Truck Bed Liner (Linex) Available in Black or Custom Colors
Connectors:	4 Nuetrik 4-Pin Connectors per box
Grille:	Powder coated Perforated Steel
Optional High Pack Cabinets:	TM1202, TM1501, TM1501N, TM1502, TM1502N, TM1510, TM1810
Optional Sub Woofers:	SS1801SQ, SS1801T, DS1802SQ DS1802T
Trapezoidal Monitor Configuration:	Clusterable, Line Source Arrayable
16 Point Rigging Adapters:	Built into each Cabinet
Height:	26 inches
Width:	16 inches
Depth:	14.75 inches
Weight:	58 lbs

Frequency Graph:

Measured @ 12ft - Full Power Cross-Over 1KHz @ 48db. No. Eq. used. Low shelf @ 45Hz 48db slope.

Back to the Solid NRG Homepage

Speakers: TM1001 / TM1002 / TM1201 / TM1202 / TM1501 / TM1501N / TM1502 / TM1502N / TM1510 / TM1810

Sub Woofers: DS1801SQ / DS1801T/ SS1801SQ / SS1801T / DS1802SQ / DS1802T

Specifications are subject to change without notice.

Solid NRG in association with Meteor Light and Sound Co.
Tel: (256) 461-8000 Fax: (256) 461-7708
Website: www.meteor-global.com Feedback Form e-mail: sales@solid-nrg.com