Features:

Solid NRG speaker subwoofer 1802 trapezoid


	Waterproof Cones
	Self Contained Transport System
	Lower Frequency response than competitors
	Hardware for Safe Ground Support Stacking
	22" Wide great for truck packs
	Special Dual 18" coupling.
	Super Low, smoother frequency response
	Great Sounds You Can Feel!

Description:
The DS 1802T is a vented trapezoidal dual (2) x 18" sub woofer system with built in handles. The DS 1802T Sub Woofer is less than 54.5" in height. Where high impact is needed, the DS 1802T is perfect for super quick concert set-ups such as Churches, Theaters and Nightclub installations. The DS 1802T has super low frequency response. Lower frequency compared with other sub woofers in its class.e low profile height as the TM1202. Great for low profile monitor applications.

Application:

The TThe DS 1802T is an excellent speaker for many applications. It is very versatile from touring to installations of any type. The Trapezoidal shape makes it very good for quick set-up of live performance applications. The DS 1802T has built in flying hardware. Hardware for ground support stacking and pole mounts available upon request.

Applications Include:


Festival Sound Reinforcement	Rave Parties	Large Mobile DJ Systems
Concert tours	Outdoor Events	Theaters
Dance Clubs	Concert Venues	Production Events
Low profile Church installations	Trade Shows	Corporate Event Presentations

Architect & Engineer Specifications:

The loudspeaker will be a bi-amp trapezoidal Subwoofer speaker cabinet tuned for use from 27HZ to 150HZ. The cabinet will be covered with linex for the most durable covering. The Cabinet will be 54.75"h x 22"w x 30"d and will weigh 210 pounds. The front grill will be 16 gauge steel powder coated both sides with a rubber surround for human protection and sound resonance dampening. The speaker wattage will be 2,000 watts RMS with peak power of 8,000 watts @ 4 Ohms. The sensitivity will be 101db spl at 1 watt 1 meter. The rigging hardware adapters are installed at 6" + 9" from back, and 2" from side of cabinet at those 3 positions. The touring version will have 8 handles on top and bottom, and 2 handles on each side of the cabinet for optimum maneuvering of the cabinet for ease of moving and transportation. The DS 1802 T Subwoofer will have its own self contained transport system built in.

Performance:


Frequency Response:	+/- 3db 31.5Hz to 100KHz - 6db 27Hz
Recommended High-Pass Frequency:	20-25Hz
Sensitivity 1 watt / 1 meter:	101db
Cabinet Impedance:	4 ohm Pin 1 Nuetrik
Power Rating RMS:	2,000 watts
Power Rating Continuous:	4,000 watts
Power Rating Peak:	8,000 watts
Recommended Cross-Over Point:	80Hz or 100Hz @ 24 - 48db

Physical:


Speaker Operation:	Sub Woofer
Type:	2 x 18" vented enclosure - Square
Material:	Highest Quality Birch Plywood
Finish:	Industrial Black Durable LINE-X Finish Available in Black
Connectors:	2 Nuetrik 4-Pin Connectors
Grille:	Powder Coated Perforated Steel
Optional High Pack Cabinets:	TM1001, TM1002, TM1201, TM1202, TM1501, TM1502, TM1510, TM1810
24 Point Rigging Hardware:	Built into Cabinet
Height:	54.5 inches
Width:	22 inches
Depth:	30 inches
Weight:	210 lbs

Frequency Graph:

Measured @ 12ft - Full Power - 2300w RMS Cross-Over @ 100Hz @ 24/ or 48db. No Eq. Low shelf @ 25Hz.

Back to the Solid NRG Homepage

Speakers: TM1001 / TM1002 / TM1201 / TM1202 / TM1501 / TM1501N / TM1502 / TM1502N / TM1510 / TM1810

Sub Woofers:SS1801SQ / SS1801T / DS1802SQ / DS1802T

Specifications are subject to change without notice.

Solid NRG in association with Meteor Light and Sound Co.
Tel: (256) 461-8000 Fax: (256) 461-7708
Website: www.meteor-global.com Feedback Form e-mail: sales@solid-nrg.com